7900GS/GT GPU/Mem Vmod

[nano]

I'll be drawing the mods when my water is done, and just thougt i would make my own guide/Images that demonstrate how to make the mod, since im BORED! (ye i know its been done a few times before)

The shot of the card were the Mem mod is done didn't turn out well, so ill be making new ones when i get a propper cam.

Bur for now, the GPU mod's:

1.2v to 1.5v:



All GPU mod's:


Vmem mod to come

[hot_fifty]

nice m8. Now you need to do the mod yourself

[nano]

nice m8. Now you need to do the mod yourself

Hehe comming up for sure, just need to finish my H2O, and deside if ill do 1.5 or 1.55

[Nosfer@tu]

No need 2 do it your self

Send it to me and I will do it 4 free

Just be My Vmod guy and I will HUCK YOU up
BTW it is a VERY nice and illustrative picture.
If all pictures in Vmod threads was like that I would have saved ALOT OF TIME

[nano]

Hehe thanks but no thanks, ill do it myself Its an pretty easy mod though

[hot_fifty]

you never say no to a freemod from the master him self in vmodding

[Nosfer@tu]

You did make an EXELENT picture nano

It has surfaced in spain now

http://forum.hardmob.com.br/showthread.php?t=311959
http://forum.hardmob.com.br/showthread.php?t=311959

It has gennerated 7 and 9 hits the last 6 days

[Bo Pedersen]

yea nice haha how dit they find it

[Nosfer@tu]

yea nice haha how dit they find it

The GREAT language English

[Bo Pedersen]

ow! hmm do you think so??
are you listed on google?? or how do a spanish guy find this HP ?

[Nosfer@tu]

Not sure
Check our member list ALOT of users from different contries

[Bam4k]

ow! hmm do you think so??
are you listed on google?? or how do a spanish guy find this HP ?

when googling 7900 gs vmod then the page will apear in the bottom.

[The heatkiller]

nice :-) time to play whit my cardt ;-)

[Nosfer@tu]

nice :-) time to play whit my cardt ;-)

MAKE IT WORK

No reason no to do it.

But the max volt setting is a bit hard for the card in the long run.
Migth only last 6 months before you will have to lower GPU clocks to get it stable.

But who cares when it is 6 months from now

[The heatkiller]

okey thx for the info what about the mem cen i get more volt to that too ?

[Nosfer@tu]

okey thx for the info what about the mem cen i get more volt to that too ?

sure you can.

But you have to use a b2 pensil or solder a resistor on it.
Know anybody that can solder?

[The heatkiller]

A b2 pensil.... what is that ? do you mens sow on like it´s ? http://www.el-supply.dk/?Gid=103&Vid=1682

[Nosfer@tu]

yup

it is a special pensil you can buy in the bookstore.

B2 defindes how much leed or what ever is in it

[The heatkiller]

okey thx i well try fin out way too buy it :-)

[The heatkiller]

Damm i can´t fin it Do you how way i can´t bye it and link too it please

[Nosfer@tu]

just go to a normal book store m8.
Ask for a Pensil, and say it has to be a B2 pensil

That is what I did.

[The heatkiller]

Hey guys i have order the pahts to it. i get them on monday i have also order a Dipswitch too tune them off and on.. cool right ?? I will also make the vmod´s for the PB5-Delux ad the same time sowe i can use it same whit the Dipswitch

Soo the Dipswitch will be my control too all the vmod.s that i make cool...

[riska]

It is named a HB2 blyant it is a regular blyant

[The heatkiller]

Wii my vmods it working 520@695 on the core and 750@883 at the mem



Ad whit out overclock on the cpu plus it only whit ari cool on gfx and cpu

[Nosfer@tu]

Wii my vmods it working 520@695 on the core and 750@883 at the mem

Vedhæftet fil 238

Ad whit out overclock on the cpu plus it only whit ari cool on gfx and cpu

did you use a pensil mod for the mem then ?

[The heatkiller]

Jeps it work finn but i have not try too use it in full scale . but I´am working on my watercoolt ring soo i cant uset agin too cool the mem on gxf.. and the rest of my computer tack a look on my water/ olie cool setup



Cool ...

[The heatkiller]

he is my vmod

[Nosfer@tu]

Dont make them 2 long m8

15 cm at the max i would say!
Also the read whires can accualy be placed down in the TP (test Points) if you like it like that.

But rule #1 of vmodding is dont fix it if it works

Did you solder them your self m8 ?

Wellcome to the world of Solder Vmods Great isent it
BTW you can go past 1.5 but that is only for SubZero

http://www.vmod.blogspot.com/ There is my old small blog
check out the 7900 GT mods :p

[The heatkiller]

Max 15cm it well not work too my new case

My has too be min 1.m soo i can hid them in the case

[The heatkiller]

Did you solder them your self m8 ?

Jeps i didt not are big problem in that i have old so did the mods for my morterbordt ad the same time

[Nosfer@tu]

Jeps i didt not are big problem in that i have old so did the mods for my morterbordt ad the same time

I cant see where you live.
You are starting to become OCTeamDenmark Material mate
Wanna play with Dryice and Ln2 ?

EDIT what mods then

[The heatkiller]

Dryice and Ln2 cut be fun too try that

I did the all off them that i cut finn for my P5B-delux Vdrop vcore DRR and NB

I tinks that the hardtes mod was on Gfx card it wont easy to solder the wires on the measurmets pionts

but only one thing when wrog was my vdrop mod i brune the pencil off when i solder the wires on it but easy too fixs